Stainless steel wires Mig-Tig

Type	Classification	Appication / Properties
307Si	AWS/SFA 5.9: ER 307 Base metal: 1.4370	Suitable for welding dissimilar and self hardening steels such as armoured and manganese steel. The weld metal has high stress resistance and is heat -resistant up to approximately 850° C.
308 LSi	AWS/SFA 5.9: ER 308 LSi Base metal: 1.4316	Suitable for welding 18/8 steels with low carbon content. Perfect arc stability and better flowing because of the higher Si content.
347 Si	AWS/SFA 5.9: ER 347 Si Base metal: 1.4551	Welding wire for Nb or Ti stabilised 18/8 and similar CrNi steels. For working temperatures up to approximately 400° C. High resistance to intercristalline corrosion and oxidising environments.
309 LSi	AWS/SFA 5.9: ER 309 LSi Base metal: 1.4332	Suitable for welding corrosion and heat-resistant Cr/Ni steel and Cr/Ni steel to unalloyed and low alloy steels. Heat-resistant up to approximately 1100° C.
309 LMo	AWS/SFA 5.9: ER 309 Base metal: 1.4459	Welding wire with high corrosion resistance, often used for buffer layers when cladding with an AISI 316 quality and for dissimilar joints with C, Mn and low alloy steels.
309 H	AWS/SFA 5.9: ER 309 LMo Base metal: 1.4829	Welding wire like AISI 309 with higher carbon percentage for better heat and wear resistance.
310	AWS/SFA 5.9: ER 310 Base metal: 1.4842	Welding wire for similar heat-resistant 25/20 CrNi steels for working temperatures up to 1200° C.Also suitable for welding ferritic stainless steel.
312	AWS/SFA 5.9: ER 312 Base metal: 1.4337	Welding wire for welding difficult to weld steel and self-hardening steels such as armouring steel, austenitic Mn steel, spring steel and high carbon steels. Very suitable for repair welding.
316 LSi	WAS/SFA 5.9: ER 316 LSi Base metal: 1.4430	Low carbon welding wire for austenitic CrNiMo steels for working temperatures up to 350° C.Very high resistance to intercristalline corrosion.
318 Si	AWS/SFA 5.9: ER 318 Si Base metal: 1.4576	Welding wire for Nb or Ti stabilised CrNiMo steels with a working temperature up to 400° C.High resistance to intercristalline corrosion and corrosive environments.
Duplex	AWS/SFA 5.9: ER 2209 Base metal: 1.4462	Welding wire for stainless steel Duplex steels, high resistance to general corrosion, pitting and stress corrosion.Maximum working temperature 280° C.
Super Duplex 2507	AWS/SFA W.Nr.: 1.4410	Welding wire developped for extreme corrosion resistance such as for SS Super Duplex, Zeron 100 ,SAF 2507, ASTM S322760, S32550 en S31260. A pulsed Arc is reccomended.
904 L	AWS/SFA 5.9: --- Base metal: 1.4539	Welding wire for extremely corrosion-resistant CrNiMoCu steels. Usable between temperatures from -196° C to 350° C. 1.4500, 1.4505, 1.4506, 1.4531, 1.4536, 1.4539, 1.4573, 1.4585, 1.4586.
320	AWS: ER 320	320 is used to weld metals of similar composition in wrought and cast forms. The weld metal provides exceptionally good corrosion resistance to a wide range of chemical environments. This being a fully austenitic alloy, it requires low heat input during welding.
4820	AWS:ER 327 Base metal: 1.4820	Low nickel special wire suitable in sulphurous environments at very high temperatures as in combustion gases. Very wear resistant, good machinable deposit.
4853	W.Nr: 1.4853	Stainless steel filler metal for welding high carbon NiCr. heat resistant alloys as in petrochemical industry
4893 (253Ma)	EN : 1.4893 ASTM : S30815	Solid stainless steel welding wire for gas shielded arc welding. This wire is developed for welding and cladding materials like 253 MA and similar alloys, the weld deposit offers excellent properties at temperatures between 850 - 1100°C.
409 Cb	AWS/SFA 5.9: ER 409 Cb	Stabilised welding wire for welding similar alloys as found in the exhaust pipe industry.
420 B or C	AWS/SFA 5.9: ER 420	Stainless steel 13% Cr alloy with high hardness suitable for many overlay applications. The type 420 C has a higher percentage carbon than 420 B.
430	AWS/SFA 5.9: ER 430	Ferritic welding wire with very high tensile strength and good corrosion resistance. Typically used in the car industry.
Alloy 17-4	ER 630	17% cromium alloy with strickly controlled chemical annalisys mainly used in turbines and materials of the same kind.
1.4115	NF Z 20 CD 17 DIN: SG-6-45 ZR	17% chrome alloy welding wire with meltdown hardness of approximately 45 HRc. For corrosion-resistant layers with a working temperature up to 550° C.
410 NiMo	AWS/SFA: ER 410 NiMo	Martensitic thermoshock-resistant alloy for wear and impact-resistant layers at changing temperatures.